從2017年9月30日起，DP18系列將停產。作為升級替代品，請查看DP20系列了解詳細信息。

DP18系列采用模塊化設計，便于選擇和安裝選件和輸入。可安裝的信號調節器卡為大用戶或OEM提供了庫存選件和備用信號的能力用于轉換輸入類型、儀表功能或維修的調節器卡。對于需要靈活隨著要求越來越苛刻，DP18的現場安裝模擬量增加了選件輸出、繼電器和通信提供了一種經濟的解決方案。

DP18系列是完整的面板儀表系列，帶有電壓、過程和溫度輸入卡測量和控制。電壓信號調節器將測量交流或直流電壓或真RMS。信號用于過程輸入的調節器接受低電平電壓或電流，這些電壓或電流可以根據工程設計進行擴展單位。溫度計將提供熱電偶或RTD的精準測量。其他輸入包括差分過程、稱重傳感器或電位計。結合OMEGA的廣泛選擇傳感器，DP18系列是過程測量的單一解決方案。

基礎型號	輸入	基礎型號	輸入
DP18-P	Process signal	DP18-RV	ac RMS current
DP18-DV	dc voltage	DP18-RT	ac RMS current (external CT)
DP18-DC	dc current	DP18-J	Type J thermocouple
DP18-DS	dc current (external shunt)	DP18-K	Type K thermocouple
DP18-AV	ac voltage	DP18-T	Type T thermocouple
DP18-AC	ac current	DP18-E	Type E thermocouple
DP18-AT	ac current (external CT)	DP18-R	Type R thermocouple
DP18-RV	ac RMS voltage	DP18-S	Type S thermocouple
DP18-L	Load cell (strain gage)	DP18-M	RTD
DP18-Q	Ohmmeter

熱電偶輸入：

型號.	范圍	分辨率	準確性	Signal Cond.
DP18-JC	-50 to 600℃	1℃	±0.5% rdg ±1 count	BD18-22
DP18-KC	0 to 1250℃	1℃		BD18-23
DP18-TC	-50 to 400℃	1℃		BD18-24
DP18-EC	0 to 650℃	1℃	±0.2% rdg ±1 count	BD18-25
DP18-SC	0 to 1750℃	1℃	±1.5% rdg ±1 count (0 to 260℃)	BD18-26
			±0.5% rdg ±1 count (260 to 970℃)
			±0.1% rdg ±1 count (970 to 1750℃)
DP18-RC	250 to 1750 ℃	1℃	±2% rdg ±1 count (250 to 500℃)	BD18-27
			±0.5% rdg ±1 count (500 to 1000℃)
			±0.2% rdg ±1 count (1000 to 1750℃)

RTD (Pt100; Alpha = 0.00385; 2- or 3-wire) Inputs

型號	范圍	分辨率	準確性	Signal Cond.
DP18-M1C	-200 to 650℃	1℃	1℃ ±1 count	BD18-20C
DP18-M1F	-200 to 400°F	1°F	1°F ±1 count	BD18-20F
DP18-M2	-150.0 to 199.9℃	0.1℃	0.4℃ ±1 count	BD18-21

Process Signal Inputs

型號	范圍	Input Impedance	Excitation	Accuracy	Signal Cond.
DP18-P1	0 to 1 V	1.1 MΩ	10 to 24 Vdc, 50 mA max	±0.15% rdg ±1 count	BD18-32
DP18-P2	0 to 5 V/1 to 5 V	1.1 MΩ
DP18-P3	0 to 1 mA	100 Ω
DP18-P4	0 to 5 mA/1 to 5 mA	100 Ω
DP18-P5	0 to 20 mA/4 to 20 mA	24.9 Ω
DP18-P6	0 to 50 mA/10 to 50 mA	10 Ω
DP18-P7	0 to 20/0 to 200 Vdc	1 MΩ			BD18-36/A

Potentiometer (Potentiometric Transducers)*

型號	Input	Excitation	Accuracy	Signal Cond.
DP18-P8	3-Wire Pot.	5 Vdc @50 mA max.	±0.15% rdg ±1 count	BD18-90

Differential Process*

型號	范圍	Accuracy	Signal Cond.
DP18-P9	0 to 20 mA	±0.15% rdg ±1 count	BD18-35

*All process input meters are fully scalable from –1999 to +1999 with selectable decimal point and zero and span adjustments

Strain Gage/Load Cell

型號	Load Cell Impedance	Input Impedance	Resolution	Sensitivity	Accuracy	Excitation	Signal Cond.
DP18-L1	350 Ω	20 MΩ	5 μV/ct	10 mV	0.15% rdg ±1 count	10 to 24 Vdc @ 50 mA max.	BD18-80

DC Voltage Inputs

型號	范圍	Input Impedance	Resolution	Accuracy	Signal Cond.
DP18-DV1	199.9 mV dc	100 MΩ	0.1 mV	0.05% of reading ±1 count	BD18-02
DP18-DV2	1.999 Vdc	1000 MΩ	1.0 mV		BD18-01
DP18-DV3	19.99 Vdc	1 MΩ	10 mV
DP18-DV4	199.9 V	1 MΩ	100 mV
DP18-DV5	600 Vdc	1 MΩ	1 V
DP18-DV6	to 2/0 to 10/0 to 100 /0 to 600 Vdc*	1 MΩ	±1 counts		BD18-11
DP18-DV7	<2 Vdc*	10 MΩ	±2 counts	0.15% ±1 count	BD18-12

*Fully scalable from –1999 to +1999, selectable decimal point, zero and span adjustments

DC Current Inputs

型號	范圍	Input Impedance	Resolution	Accuracy	Signal Cond.
DP18-DC1	1.999 mA	150 Ω	1 μA	0.05% rdg ±1 count	BD18-10
DP18-DC2	19.99 mA	15 Ω	10 μA
DP18-DC3	199.9 mA	1.5 Ω	100 μA
DP18-DC4	1999 mA	0.15 Ω	1 mA

DC Current Inputs for Use with External Shunt

型號	范圍(Amps dc)	Input Impedance	Resolution	Accuracy	Signal Cond.
DP18-DS	10/20/40/60/80 100/150/200 250/400/600/ 800 1000/1500/2000	20 MΩ	1 count	0.2% rdg ±1 count	BD18-03

Note: Requires external shunt of 60, 100 or 150 mV; range is jumper selected. To order dc shunts, see Accessories Table

MOST POPULAR MODELS

型號	描述
THERMOCOUPLE INPUT
DP18-KC-AO1	Type K thermocouple with 4 to 20 analog output
DP18-JC-R2	Type J thermocouple with dual setpoints
RTD INPUT
DP18-M1C-AO1	RTD input, 1° resolution with 4 to 20 mA analog output, ℃
DP18-M1F-R2	RTD input, 1° resolution with dual setpoint, °F
PROCESS INPUT
DP18-P5-AO1	Process input range 4 to 20 mA with 4 to 20 mA analog output
DP18-P5-R2	Process input range 4 to 20 mA with dual setpoints
DC VOLTAGE INPUT
DP18-DV1-AO1	dc voltage range 199.9 mV with 4 to 20 analog output
DP18-DV4-R2	dc voltage range 199.9 Vdc with dual setpoints
DC CURRENT INPUT
DP18-DC1-AO1	dc current range 1.999 mA with 4 to 20 analog output
DP18-DC1-R2	dc current range 1.999 mA with dual setpoints

Options for All Models

Power Options

訂單后綴	描述
-220	220 Vac
-24	24 Vac
-48	48 Vac
-12VDC	12 Vdc isolated
-15/30VDC	15-30 Vdc isolated
-24/65VDC	24-65 Vdc isolate

Note: Standard power is 110 Vac

Analog Output Options*

訂單后綴	描述
-AO1	Milliamp sink 0 to 20 mA max.
-AO2	Milliamp source 0 to 20 mA max.
-AO3	Voltage 0 to 10 Vdc max.
-APH2	Analog peak hold

控制輸出/通信選項

訂單后綴	描述
-R1	單個設定值
-R2	雙設定點
-APH1	模擬峰值保持

*每米至多可指定 1 個模擬輸出選項和 1 個控制輸出/通信選項

顯示選項

訂單后綴	描述
-GR	綠色顯示屏
-DN	顯示保留